[Mobotix] Q24M Firmware Upgrade to 4.0.4.18

I just completed the upgrade from 4.0.2.33.r2 to 4.0.4.18. It went unsurprisingly quick and smooth. The firmware MPL file can be downloaded from the Mobotix site.. The whole process took less than three(3) minutes to backup the config, upload the firmware and have the camera automatically reboot. Here is the log shown from MxControlCenter.

- preparing system for upload
- starting upload
Update started Fri Nov 12 15:38:19 EST 2010 
Signatures passed.
Upload part #0: CHECK_SCRIPT
Checking camera type.
Correct camera type 2.
Upload part #1: BOOTLOADER
Upload part #2: KERNEL
Upload part #3: RAMDISK
Upload part #4: DEFAULTCONFIG
Upload part #5: PATCH
STATUS:OK:
- preparing system after upload 

and from the remote log stored on the fileserver:

I 2010-11-12 15:38:13 STORAGE main[1091] shut down by admin
S 2010-11-12 15:38:13 EVENT process Shutdown upon admin request...
E 2010-11-12 15:38:45 STREAM MxPEG[8590] Closing stream to X.x.X.X. Transferred 0 frames (0.00 fps) with 0.0 MB (0 kbps).
S 2010-11-12 15:38:46 STORAGE check[1072] Camera switched to Admin Mode. Stopping File server check.
S 2010-11-12 15:38:46 MXM modularMX fileservercheck exiting.
E 2010-11-12 15:38:48 STREAM MxPEG[8609] Closing stream to X.x.X.X. Transferred 0 frames (0.00 fps) with 0.0 MB (0 kbps).
E 2010-11-12 15:38:56 STREAM MxPEG[8659] Closing stream to X.x.X.X. Transferred 0 frames (0.00 fps) with 0.0 MB (0 kbps).
E 2010-11-12 15:39:06 STREAM MxPEG[8768] Closing stream to X.x.X.X. Transferred 0 frames (0.00 fps) with 0.0 MB (0 kbps).
E 2010-11-12 15:39:07 STREAM MxPEG[8771] Closing stream to X.x.X.X. Transferred 0 frames (0.00 fps) with 0.0 MB (0 kbps).
S 2010-11-12 15:39:14 MXM PlatformExpert preparing for system shutdown...
S 2010-11-12 15:39:14 MXM PlatformExpert ALL HANDS ABANDON SHIP!!!
I 2010-11-12 15:39:56 STATUS statusd Camera Q24M-Secure 10.8.191.145 is booting software version MX-V4.0.4.18. (0)
I 2010-11-12 15:39:57 BOOT cert[641] Certificates extracted.
I 2010-11-12 15:39:58 BOOT route[712] setting up 'default': route add default gw 192.168.1.1 dev eth0
I 2010-11-12 15:39:58 BOOT eventdlite[741] updated configuration.
I 2010-11-12 15:39:59 BOOT eventdlite[741] updated configuration.
I 2010-11-12 15:39:59 BOOT eventdlite[741] updated configuration.
I 2010-11-12 15:39:59 BOOT fileserver[764] setting up periodic saving of logfiles to fileserver.
Advertisements
This entry was posted in Security. Bookmark the permalink.

One Response to [Mobotix] Q24M Firmware Upgrade to 4.0.4.18

  1. Pingback: [Mobotix] Q24M Firmware Upgrade to 4.0.4.19 | Well-Rounded

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s